


BOOST PLUS Concentrated Cleaner and Sealer Booster for Stone, Tile and Grout
Product details
- Safe & Easy To Use – Rinse Free – Streak Free Formula
- Ultra Concentrated – Pleasant lemon scent – Phosphate free
- For Routine cleaning of tile, stone, grout, encaustic tiles etc
- Regular Use Helps Prevent Grime & Soap Scum Build Up
- Boosts existing sealer & polished porcelain factory pre-seal
Couldn't load pickup availability
Pickup available at KURNELL
Usually ready in 24 hoursProfessional Grade · Sealers Plus (an Aqua-Seal brand)
Fast dispatch from Kurnell, NSW
Not sure? Call +61 2 9521-4000

BOOST PLUS – Concentrated Cleaner and Sealer Booster for Stone, Tile and Grout
Full description
About BOOST PLUS
Boost Plus is a rinse-free, streak-free ultra concentrated pH neutral everyday cleaner and re-sealer for sealed stone, tile, grout and porcelain surfaces.
Technical Bulletin (PDF) ›Description
Boost Plus is a new generation, rinse free, streak free ultra concentrated pH neutral cleaner & re-sealer. This no VOC, biodegradable neutral cleaner, when used regularly and as per directions, helps maintain your sealed surface in a pristine condition and helps support the longevity of your existing sealer.
- Regular use also helps reduce build up of soap scum and hard water deposits
- Leaves a room smelling fresh and clean with a fresh lemon scent
Use: for sealed stone, tile, grout, porcelain tile and other surfaces.
Limitations
- Boost Plus is formulated to help keep a clean surface looking clean
- Not for heavy duty cleaning. Heavily soiled or neglected areas will require cleaning with XtremeClean+
- See our problem solvers for heavy duty cleaning and problem solving products
How to use
- Sweep, vacuum, or wipe the surface
- Dilute Boost Plus as follows:
- General: dilute 50 ml of Boost Plus to 4 litres clean water
- Heavy: dilute 100 ml of Boost Plus to 4 litres clean water
- Damp mop the surface with a microfibre mop or white nylon pad
- No rinsing required
- Repeat the process as necessary
Dilution rates
| Dilution | Rate |
|---|---|
| General | 50 ml Boost Plus to 4 litres clean water |
| Heavy | 100 ml Boost Plus to 4 litres clean water |
Coverage
Coverage will vary depending on density, porosity, texture, surface absorption, weather, time the solution is left on the surface, the application method, the severity of the problem and the dilution used.
Precautions & safety directions
- Read entire label, SDS & technical bulletin before using
- Wear appropriate skin & eye protection
- Use when surface temperature is between 4°C & 32°C
- Do not allow contact with non-recommended surfaces
- Do not mix with other chemicals
- Change the cleaning solution as it gets dirty
Test first: due to the nature of different surfaces, do several test areas in inconspicuous areas according to the label instructions to determine surface colour stability and desired results. The end user must determine the suitability of the product for their intended use.
Handling, storage & clean up
- Close container tightly after each use
- Store between 4°C and 32°C
- Do not re-use container. Discard in rubbish
- Clean tools and hands with clean water
First aid
Contact a doctor or Poisons Information Centre (Australia Ph: 131-126, NZ Ph: 0800 764766).
- Ingestion: do not induce vomiting. Give water or milk to drink
- Eyes: no effects expected. If irritation occurs, immediately flush eyes with clean, running water for at least 15 minutes & see a doctor
- Skin & hair: remove contaminated clothing. Immediately wash contaminated skin & hair with plenty of water
- Inhalation: first aid not generally required. If in doubt, seek medical advice
- General: if irritation persists or feeling unwell, seek medical attention
How to use, product details and information
What to use on
Surfaces
Tap a surface to see every product for it. Always test in an inconspicuous area first. Not sure? Use the Product Selector below.
How much do I need?
Questions about a product or your project? Our team is here Monday to Friday.
-
Call us
-
Email us
-
Shipping
See our shipping policy for delivery times and costs.
-
Product Selector
Answer 3 quick questions on our Product Selector.
