Full description

About STONE WASH+

Stone Wash+ is a professional grade concentrated alkaline deep cleaner, conditioner and commercial grade disinfectant for stone, terrazzo and more.

Technical Bulletin (PDF) ›
Description

Stone Wash+ is formulated with the latest cutting edge ActiveShield Antibacterial Action technology. It is a Professional Grade, highly concentrated, alkaline deep cleaner, conditioner and commercial grade disinfectant.

  • Helps remove odours and disinfects and sanitises surfaces
  • Helps remove dirt, grease, grime, soap scum, wax, oil, mildew, porcelain wax and floor finishes
  • Helps inhibit mould growth
  • Kills E-Coli and S Aureus as evaluated in accordance with TGA Test for Commercial Grade Disinfectants
Works on & where to use

Works on: all natural stone e.g. bluestone, granite, marble, limestone, travertine and more, porcelain, ceramic, encaustic, brick and terrazzo, grout, concrete, terracotta, saltillo, pavers, mosaics (stone, metal and glass) and engineered stone.

Where to use: indoor, outdoor, domestic and commercial areas, e.g. homes, hotels, motels, resorts, schools, child and aged care, restaurants, bars, commercial kitchens, shopping malls and more.

Test first: always test first in an inconspicuous area to determine ease of application, dilution rate, colour stability and desired results. The end user must determine suitability of the product for their own use.

Dilution rates
UseRatioExample mix
Light cleaning, conditioning + disinfecting1:20 - 1 part Stone Wash+ to 20 parts water200 ml Stone Wash+ to 4000 ml water = 4.20 litres cleaner
Moderate cleaning, conditioning + disinfecting1:10 - 1 part Stone Wash+ to 10 parts water400 ml Stone Wash+ to 4000 ml water = 4.40 litres cleaner
Heavy duty cleaning, conditioning + disinfecting1:5 - 1 part Stone Wash+ to 5 parts water500 ml Stone Wash+ to 2500 ml water = 3 litres cleaner
Severe heavy duty cleaning + disinfecting1:2 - 1 part Stone Wash+ to 2 parts water1.00 L Stone Wash+ to 2.00 L water = 3 litres cleaner
How to use

Always add Stone Wash+ to clean water to prevent splashing.

  1. Sweep, vacuum or wipe the surface
  2. Dilute depending on cleaning requirements (see dilution rates)
  3. Carefully apply the diluted solution to the surface
  4. Allow a minimum dwell time of 10 minutes
  5. Do not let the product dry on the surface - add more
  6. Scrub with a white nylon pad, scrub brush or scrub machine
  7. Remove the dirty solution with a wet vac or mop
  8. Rinse thoroughly with clean water
  9. Repeat the process as necessary

For dirty grout joints, scrub with a grout brush, remove the dirty solution with a wet vac then rinse. The surface is then clean and disinfected.

Limitations

Badly stained grout may require re-grouting or re-colouring with Colour'N'Seal. For appropriate stain removal or problem solving products, refer to www.sealersplus.com.au.

Precautions & safety directions
  • Read the entire label, SDS and technical bulletin before using
  • Wear appropriate gloves, skin and eye protection
  • Do not kneel in the product or allow skin contact
  • Do not breathe fumes, mist, vapours or spray
  • Use when surface temperature is between 4°C and 32°C
  • Do not allow contact with non-recommended surfaces
  • Do not mix with other chemicals
  • May affect some dark grouts and also grout colourants
  • Hard surface disinfectant only. Do not use on skin
  • Regular use of high alkaline cleaners can affect performance of sealers, coatings, grout colourants and floor finishes
  • Do not use undiluted. May dull or discolour some surfaces
  • Test first in an inconspicuous area to determine ease of application, dilution rate, colour stability and desired results
Handling, storage, clean up & first aid

Handling, storage & clean up: close the container tightly after each use and keep upright. Store locked up in the original container in a well ventilated cool area and protect from sunlight. Shelf life is approx 3 years in an unopened container, less after opening. Use before the use by date; use beyond that time does not necessarily mean the product is not usable, but do a small test area first. Do not re-use the container; rinse and discard in rubbish. Wash tools, gloves and shoes with water before they dry.

First aid: immediately contact the Poisons Centre (Australia Ph: 131-126, NZ Ph: 0800 764-766) or a doctor.

  • Ingestion: rinse mouth. Do not induce vomiting
  • Eyes: rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing
  • Clothes: remove contaminated clothing and wash before use
  • Skin & hair: wash with plenty of soap and water
  • Inhalation: remove victim to fresh air and keep at rest in a comfortable position for breathing
  • General: if any irritation persists, get medical advice

Caution: keep away from skin and eyes - do not kneel in product. Contains Benzalkonium Chloride 0.9%.

What to use on

Tap a surface to see every product for it. Always test in an inconspicuous area first. Not sure? Use the Product Selector below.

How much do I need?

  • 5 stars: 1 (50%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 1 (50%)
A
Anonymous

I wasn’t impressed at all with the product it didn’t remove dirt as advertised and It required extensive manual brushing. In the end I had to revert to high pressure to get the result I wanted.

A
Anne

Brought my tiles up really well, cleaned the grout well as well

Chat on WhatsApp