HOW TO REMOVE EFFLORESCENCE FROM TILES, BRICKS & PAVERS
Step-by-step instructions for ceramic, porcelain, tessellated and terracotta tiles, bricks, pavers and other acid-resistant surfaces, from the team who make Sealers Plus Professional Grade products in Kurnell, NSW.
Dilute, dwell, scrub, rinse
OxiTreat+ is a Professional Grade, concentrated acid cleaner that helps remove efflorescence (white salt deposits), cement smear and grout haze from acid-resistant surfaces. On walls, splashbacks and other vertical surfaces, use Oxi Gel+, the ready-to-use cling gel.
- Floors: OxiTreat+, dilute from 1:40 for light cleaning, 1:20 or stronger to disinfect (see dilution rates)
- Walls & vertical surfaces: Oxi Gel+, ready to use. See Remove Efflorescence from Walls
- Minimum 10 minutes dwell time. Don't let it dry on the surface
- Scrub, pick up with a wet vac, then rinse thoroughly
- For acid-resistant surfaces only. Always test first
- Not for marble, limestone, travertine or other acid-sensitive surfaces: see acid-sensitive surfaces
- Keep away from non-recommended surfaces
What is efflorescence?
Efflorescence is the white, powdery or crusty salt deposit that can appear on tiles, grout, bricks, pavers and concrete. Water moving through cement-based materials such as grout, adhesive, screed, mortar and concrete dissolves natural salts and carries them to the surface. When the water evaporates, the salts are left behind.
It often shows up on new installations while they cure and dry out, and it can return while moisture keeps moving through the installation. Plain water alone often just re-dissolves the salts, which can reappear as the surface dries.
Before & after

Suitable for
- Ceramic, porcelain and tessellated tiles
- Terracotta and quarry tiles
- Bricks, pavers and mosaics
- Acid-resistant natural stone e.g. granite, bluestone, basalt (test first)
- Floors and walls, indoors and outdoors
Where to use
- Domestic: homes, units, duplexes etc
- Commercial: hotels, shopping centres, restaurants, schools, aged care etc
Not for
- Marble, limestone, travertine, terrazzo, encaustic tiles, Saltillo, concrete or other acid-sensitive surfaces
- Acid-sensitive surfaces: use 1. Eff-Ective+ (coming soon) 2. MicroScrub. See Remove Efflorescence from Acid-Sensitive Surfaces
- Metal fixtures, drains and trims (protect them)
What you'll need
- OxiTreat+ (floors) or Oxi Gel+ (walls)
- Scrub'N'Clean Kit, white nylon pad or scrub brush
- Grout brush for the joints
- Plastic bucket and measuring jug (never metal)
- Broom, plus a wet vac (recommended) or mop
- Plenty of clean water and cotton towels
- Gloves, eye, skin and foot protection
- Optional: slow-speed scrub machine for larger areas
Before you start
- Always do a test area first
- Surface temperature between 4°C and 32°C
- Work out of direct sun and wind so the solution doesn't dry
- Treat the area once it has dried out
- Protect plants, metal fixtures and any acid-sensitive surfaces nearby
- Keep children and pets away until the area is rinsed and dry
Step-by-step
Prepare → Treat → Remove + rinse
1Prepare
Prepare the area
Sweep, vacuum or wipe the surface and dry-brush off loose white salts. Protect plants, metal fixtures and any acid-sensitive surfaces nearby.
2Prepare
Do a test area first
VERY IMPORTANT
Try your dilution on a small, hidden spot. Check colour stability, dark grouts and grout colourants, and how well the efflorescence lifts. Start with the weakest dilution that works.
3Treat
4Treat
Apply evenly
Carefully apply the diluted solution with a mop or sponge. For Oxi Gel+, pour onto a gloved hand, sponge or white pad and smear evenly over the surface. Work in sections you can keep wet.
5Treat
Allow 10 minutes dwell time
Allow a minimum dwell time of 10 minutes. Don't allow the product to dry on the surface: add more. Some areas may need a longer dwell time and/or a stronger solution.
6Treat
Scrub
Scrub with a white nylon pad, scrub brush or scrub machine. Scrub the grout joints with a grout brush.
7Remove + rinse
Pick up and rinse
Remove the dirty solution with a wet vac or mop, then rinse thoroughly with clean water and pick up the rinse water too.
8Remove + rinse
Check when dry, repeat if needed
Check the area once it is fully dry. Repeat the process as necessary until you're happy with the result.
Dilution rates: OxiTreat+
| Use | Add OxiTreat+ per 4 L water | 1 L OxiTreat+ makes | Approx. m² per 1 L OxiTreat+ concentrate |
|---|---|---|---|
| Light cleaning – no disinfecting (1:40) | 100 mL | 41 L | 280–410 m² |
| General cleaning + disinfecting (1:20) | 200 mL | 21 L | 140–210 m² |
| Moderate cleaning + disinfecting (1:10) | 400 mL | 11 L | 70–110 m² |
| Heavy duty cleaning + disinfecting (1:5) | 800 mL | 6 L | 40–60 m² |
| Extreme cleaning + disinfecting (1:2) | 2 L | 3 L | 20–30 m² |
COVERAGE: As a guide, 1 L of diluted ready to use solution covers approx. 7–10 m², depending on the severity of the problem, how many times the process is repeated, surface porosity and texture, and site conditions.
To disinfect use 1:20 or stronger with a minimum 10 minutes wet contact time. 1:40 is for light cleaning only.
Always add OxiTreat+ to clean water to prevent splashing. Oxi Gel+ is ready to use: no dilution required.
Tips for the best result
- Dry-brush loose salts first, and pick up all of the dirty solution: dissolved salts left behind can dry back to white
- Work in small sections and never let the solution dry on the surface
- On dark grouts and grout colourants, check the test area once fully dry
- Walls, splashbacks and showers: Oxi Gel+ clings to vertical surfaces. Step by step: Remove Efflorescence from Walls
- New installations can keep pushing salts out while they cure: let them dry out, then treat
- If efflorescence keeps coming back, have the installation checked for where the moisture is coming from (falls, drainage, waterproofing)
Prevent it next time + aftercare

Eff-Shield+: prevent, added to grout, adhesive, screed and mortar while mixing.

EzyClean+: Daily / Weekly cleaning, pH neutral.

XtremeClean+: Half yearly or as needed heavy-duty clean.
Precautions
- Read the entire label, SDS and technical bulletin before using
- Wear appropriate gloves, skin and eye protection
- Do NOT breathe fumes, mist, vapours or spray, or kneel in product
- Use when the surface temperature is between 4°C and 32°C
- Do NOT allow contact with acid-sensitive surfaces
- Do NOT mix in metal containers or with other chemicals
- May affect dark grouts, grout colourants and polished surfaces
- Hard surface disinfectant only. Do NOT use on skin
- WASH UNDERSIDE OF SHOES BEFORE STEPPING ONTO OTHER AREAS.
Limitations
Badly stained grout may require re-grouting or re-colouring with Colour'N'Seal.
For other stains and problems, see our Problem Solvers and the Stain Removal Guide.
For additional options, contact the Sealers Plus Technical Services Team at support@sealersplus.com.au or call +61 2 9521-4000 with details of the problem you are addressing.
Important note
These recommendations are general guidelines for problem solving. Actual dilution ratios and cleaning requirements may vary depending on the surface, the use, the amount and the method of application.Read the entire Product Label, SDS and Technical Bulletin before using any product.
ALWAYS TEST A SMALL AREA to determine the ease of application, dilution, dwell time and desired results.
Keep the surface clean and dry to reduce the possibility of slip-fall accidents.


